The incoming 23.65 m2 expanded to 25.05 m2 to the production office, and the space could meet the packaging operation. Die-cutting area: Change to Production Office, Due to the demand of diffusion capacity in the current die-cutting area, There is not enough space, The position needs to be readjusted, Auxiliary silo: The raw and auxiliary material silo is completely transformed into a fire-fighting passage, Set aside an area for transformation in SMT, as shown in Figure 8. Automatic first line: half assembly cable and south extension machine area, inner packaging area is transformed, assembly cable can be changed to automatic second line operation arrangement mode, i.e. Moving and adjusting cable spacing, inner packaging area adjusted to 6 6SMT part area is changed to auxiliary material bin (Figure, area can be used for production; 3.1 The die-cutting area is being expanded, and the number of die-cutting equipment to be applied for in the required area shall be determined, and the position adjustment shall be evaluated again. 3.2 Tuonan Film Sticking Machine suggests that the application should be transferred to ATV Headquarters by Manager Li of ATV Equipment Department. 3.3 The position of SMT's door will be readjusted as shown in the figure. There will be one automatic line and six manual lines, which will be one less manual line than the original arrangement. The length, width and height of fire engines are a decisive factor affecting the traffic capacity of fire lanes. Generally, the length of fire engines is greater than or close to 10m, the height is nearly 4m, and the width is nearly 2.5 m. Article 6.0. 2 of the "Construction Regulations" stipulates that the clear height and width of fire lanes passing through buildings shall not be less than 4m, which is determined according to the external dimensions of various fire vehicles used in China. Considering that the speed of fire engines is generally faster, a certain safety factor should be ensured on the width when passing through buildings to facilitate the fast speed of vehicles.黑教廷欲计划利用明珠主校区考核夺取莫凡身上的地圣泉。宇昂放出暗影妖兽的假消息设计莫凡，不料许昭霆却先落入埋伏。莫凡救下张璐璐，许昭霆却被与宇昂变成了黑畜妖，被迫向张璐璐动手。人性未泯的许昭霆提供了黑教廷蓝衣执事的线索。莫凡悲痛不已，决定先发制人。 莫凡将一滴地圣泉放在暗影妖兽体内，借此引蛇出洞，果不其然发现内鬼傅天明。众人不明真相，反而围攻莫凡。莫凡不慎掉入宇昂的陷阱，面对诅咒畜妖的攻击，却接到唐月命令要拖住宇昂的行动。原来蓝衣执事正在冒险逗留等待宇昂。再争取一些时间，审判员夜鹰就可实施抓捕。 拉锯战后，魔法阵消失，宇昂下令围绞莫凡。莫凡忍无可忍，释放玫炎气焰取得了胜利。宇昂见势逃离现场，身受重伤的莫凡却遭到了众人的污蔑。好在夜鹰及时出现真相大白。考核风波结束后，莫凡、赵满延等人被定为交换生，将去往帝都学府。两校展开切磋，莫凡展示出超强实力战胜穆宁雪，为明珠学府赢得胜利。依照约定，莫凡得到凝魔神器。 荒城历练开始，众人误入了洞穴魔奴的巢穴，展开激战，成功逃脱。抵达荒城，又因误入藤蔓捕食陷阱，牵扯出对莫凡的积怨。莫凡离队独行，在泥鳅坠的指引下，收获了更多精魄。大部队遭遇了绿皮大蜥，莫凡加入帮助大部队摆脱了绿皮大蜥的纠缠。众人休憩时遭到了水蜘蛛的叮咬，队伍乱成一团。莫凡和穆宁雪合力对抗蛊惑魔蛛，经过一场恶战终于消灭了魔蛛。 众人伤亡惨重，折返路上遇到陆年，结果陆年却下了杀令，双方大打出手。莫凡一路诱敌深入，利用蜥颅巨妖威胁追敌。蜥颅巨妖的攻击猛烈，莫凡命悬一线。在疾星狼的守护下，莫凡冲破枷锁升华了星子，使出烈拳九宫脱身。陆年俘虏了众人胁迫莫凡，斩空及时赶到与陆年开战。 形式所逼，莫凡接受血利子,成功觉醒恶魔系。友情大义当前，他控制住恶魔系，救下众人。莫凡战退妖兽，现身惩治陆年。恶战结束，莫凡急需从恶魔异变之中恢复，但就连斩空也无能为力。恶魔莫凡擅自离开，生死未卜。江东看守所因依傍鸭绿江而美丽。但所长尚光明的心情却一点也不美丽，因为他陷入了内外交困。所里，在押人员黄三宝劫持同室人掀起轩然大波；家里，妻子由于送儿子入伍体检被三轮车撞伤；萧伟、于蕾蕾等新分来的85后管教适应不了紧张工作和艰苦环境纷纷要求调走；女大队长刘悦家庭陷入危机；他的老领导、副所长夏援朝因监守理念和管理方法的分歧经常作梗……但是，军人的血性使尚光明临难不惧，迎难而上，坚持人性化管理不动摇……鸭绿江静静流淌，一幕幕催人泪下的故事在这高墙铁门内上演——小歌星百灵改判转监前，献歌《妈妈的吻》；盗墓贼崔侉子押赴刑场前唯一请求将关押在外地的兄弟转押江东；朝鲜族妇女朴英子临行前带着镣铐跳起朝鲜舞，向管教跪下谢恩……周一一，32岁，丰满可爱，中等姿色，原是购物频道主持人，经历了男友张诚军爱上自己好友庄静的打击之后，毅然决定离开购物频道，调入999电台。却不料，第一次电台直播那天，由于突遭大雨，出租车被一个男人抢了，直播因此开了天窗，周小易被领导批评到万劫不复。抢周一一出租车的男人正是全城最红电台1088的最红DJ曹砚。曹砚性格桀骜，三年前女友刘真的离去令他一直情伤未复，虽然事业如日中天，但内心寂寞。General Conditions抗日战争时期，中共地下党员刘成巧妙利用国民党秘密组建的一支由五名女特种兵组成的女子拆弹部队，完成了多项党组织交代的任务。这支特殊的女子拆弹部队，专门负责排除各种炸弹险情，并利用炸弹技术深入敌后，与日本人展开激烈斗争。在与刘成共同战斗的过程中，女子拆弹小队也逐渐心向中国共产党，最终走上了共同抗日的道路。Heilongjiang Province
